29
2
Adjust the focus.
Adjust the focus at the same time as
pan and tilt adjustment.
Repeat steps (1) and (2) to adjust the
focus.
(1) Loosen the zoom lock lever, move
the lens to the appropriate view
angle between TELE and WIDE,
and tighten the lever.
(2) Loose the focus lock lever, rough-
adjust the focus, and tighten the
lever.
..............................................................................................................................
Note
• When either the zoom or focus is changed, the other also is changed.
Repeat steps (1) and (2) to adjust. Fine-adjust the focus by ABF as follows.
...................................................................................................................................
3
Press the ABF button.
The ABF LED (
→
page 13) lights, the
focus position is displayed at the
bottom of the adjustment monitor
screen, and the back focus is
automatically adjusted.
When connected to a network, the
camera can be operated and checked
from a PC.
..............................................................................................................................
Note
• Pressing and quickly releasing the ABF button immediately starts ABF adjustment.
• If you hold down the ABF button for at least 2 seconds, ABF adjustment is started after
about 3 minutes. Use this for final adjustment after attaching the dome.
...................................................................................................................................
(1) Zoom lock lever
(2) Focus lock lever
WIDE
NEAR
TELE
FAR
