13
Transmit Images to an FTP Server
Images can be transmitted to an FTP server. By configuring the following settings, transmission of images
captured when an alarm occurs or captured at a designated interval and sent to an FTP server will become
available.
Important
• When using this function, set the user name and the password to access the FTP server to restrict users
who can log into the FTP server. (
→
Setup Manual)
• To transmit images to the FTP server, select "Not use" for "SD memory card" or select "FTP error" for
"Save trigger" on the [SD memory card] tab of the "Basic setup" page. (
→
Setup Manual)
• Depending on the network environment in use, results according to the setup may not be obtained.
Transmit an alarm image at an alarm
occurrence
(alarm image transmission)
An alarm image can be transmitted to the FTP server when an alarm occurs. To transmit alarm images to an
FTP server, it is necessary to configure the settings on the [FTP] tab of the "Server setup" page. (
→
Setup
Manual)
The alarm image can be configured on the [Alarm] tab of the "Alarm setup" page. (
→
Setup Manual)
