11
• Notice of an alarm occurrence to the device connected to the alarm output terminal (
→
Setup
Manual)
It is possible to output signals from the alarm output
terminal and sound the buzzer when an alarm occurs.
The settings for the alarm output can be configured on the
[Alarm] tab of the "Alarm setup" page.
• Transmission of an image to a server automatically (
→
Setup Manual)
An alarm image can be transmitted to a predesignated
FTP server when an alarm occurs.
The settings required to transmit an alarm image to a FTP
server can be configured on the [Alarm] tab of the "Alarm
setup" page or on the [FTP] tab of the "Server setup"
page.
Important
• Select "FTP error" for "Save trigger" on the [SD
memory card] tab of the "Basic setup" page when
using the SD memory card. When "Alarm input" is
selected for "Save trigger", an alarm image will not be
transmitted to the FTP server when an alarm occurs.
