10
[Precautions for use]
This system is designed to be used
indoors. This product is not operable out-
doors.
To keep on using with stable performance
Do not use this camera in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. (Recommended
operating temperature: +35 °C or lower)
Do not expose this camera to direct heat
sources such as a heater.
Handle this camera with care.
Do not drop this camera, nor apply shock or
vibration to this camera. Failure to observe this
may cause trouble.
About the PC monitor
Displaying the same image on a CRT type
monitor for a long time may damage the moni-
tor. It is recommended to use a screen-saver.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around 2
minutes after the restart just as when the power
is turned on.
Product disposal/transfer
Images saved on the SDHC/SD memory card
may lead to personal information leakage.
When it is necessary to dispose or give this
product to someone, even when for repair,
make sure that there is no data on the hard
disk drives.
Cleaning this product body
Be sure to turn off the power before cleaning.
Do not use strong abrasive detergent when
cleaning this camera. Otherwise, it may cause
discoloration.
When using a chemical cloth for cleaning, read
the caution provided with the chemical cloth
product.
When the dirt is hard to remove, use a
mild detergent and wipe gently.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Then, wipe off the
remaining detergent with a dry cloth.
Transmission interval
Image transmission interval may become slow
depending on the network environment, PC
performance, shooting subject, access num-
ber, etc.
About SDHC/SD memory card
• Before inserting the SDHC/SD memory
card, turn off the power of this product
first. Otherwise, it may cause malfunction
or damage data recorded on the SDHC/
SD memory card. Refer to page 17 for
descriptions of how to insert/remove an
SDHC/SD memory card.
• When using an unformatted SDHC/SD
memory card, format it using this camera.
Recorded data on the SDHC/SD memory
card will be deleted when formatted.
If an unformatted SDHC/SD memory card
or an SDHC/SD memory card formatted
with other devices is used, this product
may not work properly or performance
deterioration may be caused. Refer to the
Operating Instructions (PDF) for how to for-
mat a SDHC/SD memory card.
• If another SDHC/SD memory card is used,
this product may not work properly or per-
formance deterioration may be caused.
Code label
The code labels (accessory) are required at
inquiry for trouble. Use caution not to lose
these labels. It is recommended to paste one
of the labels onto the CD-ROM case.
