19
Important:
• Joint both sides of the front and rear sunshields
before fitting in the main sunshield.
• Do not trap the safety wire inside.
• The safety wire is designed to support only the
weight of the camera when the camera falls.
Do not put an excessive weight that the safety
wire cannot support.
STEP 9
Fit the front and rear sunshields in the main sunshield.
• Align " " of the rear sunshield to " START" of the
main sunshield. Then, turn the front and rear
sunshields toward "LOCK" until a click is heard.
Front and rear sunshields (accessory)
Main sunshield
Align " " to " ".
STEP 10
Fix the front and rear sunshields on the camera using
the front/rear sunshield fixing screw (accessory).
(Recommended tightening torque: 0.72 N·m)
Front and rear sunshields fixing screw (accessory)
Important:
• When the power of the camera is turned on,
the camera will start panning and the position
will automatically be initialized.
Note:
• When removing the front and rear sunshields,
perform steps 8 to 10 in the reverse order.
