34
Reference
pages
Cause/solution
Symptom
• Are the power cord and coaxial cable connected appropri-
ately?
→
Check whether the connection is appropriately estab-
lished.
Troubleshooting
No image displayed
Blurred image
Damaged power cord
sheathing
Heated portion of power
cord during use.
Warmed power cord or
loosened connection by
bending or stretching dur-
ing use.
LED not lit
14
• Is the monitor luminance appropriately adjusted, or is the
contrast appropriately adjusted?
→
Check whether the monitor settings are appropriate.
–
• Is the lens of the camera soiled with dirt or dust?
→
Check whether the lens of the camera is clean.
–
• Is the focus adjusted correctly?
→
Check if the focus is adjusted correctly.
16
• The power cord is damaged.
Use of the damaged cord may cause electric shock or fire.
Turn off the power immediately and request repair to your
dealer.
–
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not
described below.
• Is power supplied to the camera?
→
Check whether power is supplied to the camera.
• Is "ON" selected for the LED setting?
→
Check whether "ON" is selected for the LED setting.
–
31
