![background image](http://html.mh-extra.com/html/panasonic/wv-cw240s/wv-cw240s_operating-instructions-manual_277863008.webp)
-8-
t
Azimuth adjuster
Adjusts the azimuth angle to obtain a level image.
y
Pan lock screw
Fixes the panning position after adjusting.
u
Video jack (3.5-diam. mini jack)
For connecting an LCD monitor to adjust the cam-
era images. Use an L-type plug to save space.
i
Aperture Level Selector
SHARP:
Sharpens the image outline.
SOFT:
Softens the image outline.
The default setting is SHARP.
o
Back Light Compensation Selector
ON:
Compensates the background if it is brighter
than the object.
OFF:
Does not compensate.
The default setting is OFF.
!0
Synchronization Mode Selector
Specifies a source for synchronization.
INT:
Internal 2:1 interlace.
LL:
Line-lock mode driven by 24 V AC or 220 V-240
V AC.
The default setting is INT.
Note:
Do not set the switch to LL (Line-Lock) posi-
tion when supplying 12 V DC to avoid synchro-
nization error.
!1
Heater power connector
Supplies power to the optional heater unit when it is
built in the camera. Connect here a harness stick-
ing out from the heater unit.