![background image](http://html.mh-extra.com/html/panasonic/wv-cp500-series/wv-cp500-series_operating-instructions-manual_262063014.webp)
14
Manual fine adjustment of white balance
The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature
tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC).
Follow the procedure below.
Step 1
Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the setting button.
→
The fine adjustment screen appears.
Step 2
Move the cursor to "R" and "B" and use the right or left button to fine adjust the level for each.
When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–"
direction, the color becomes lighter.
7. Digital noise reduction function setting [DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance.
The effect level of the noise reduction function is selectable from the following:
LOW:
Low level of noise reduction (small residual image).
HIGH (default):
High level of noise reduction (large residual image).
8. Black-and-white mode setting [BW MODE]
The settings relating to the black-and-white mode can be configured. Follow the procedure below.
Important:
• When "BW" is set for "ALARM IN", the "EXT" indication will be displayed for "BM MODE" and it is impossible to change the
setting. (
+
Page 23)
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
"BW MODE" screen
"CAMERA SETUP" screen
**BW MODE**(1)
AUTO1
LEVEL HIGH
DURATION TIME .|..
S L
BURST(BW) ON
RET TOP END
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
Fine adjustment screen
"CAMERA SETUP" screen
**ATW1**(1)
R ...|... 0
- +
B ...|... 0
- +
RET TOP END