ELC
ALC
SHARP
SOFT
BLC ON
OFF
MIC ON
OFF
q
w
e
r
t y
i
!0
u
o
!5
!6
!1
!2
!3
!4
VIDE
O O
UT
MAX
POWER
MIN
VOLUME
ELC
ALC
SHARP
SOFT
BLC ON
OFF
MIC ON
OFF
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q
Camera Mounting Bracket
Install on the wall or ceiling. See INSTALLING
PROCEDURE below.
w
Pan Fixing Ring
Tighten after adjusting the pan angle.
e
Pan Head
Attach the camera on this.
r
Auto Iris Lens Connector
Supplies power and DC control signals to an
auto iris lens (not supplied).
t
Flange-back Adjusting Ring
This ring adjusts the back-focal distance or
picture focus.
y
Lens (option)
u
Camera Mounting Adapter
There is a hole for mounting the camera onto
a mounting bracket. The camera is originally
designed to be mounted from the bottom, but
a top-mounting type is also available. To
mount from the top, remove the mount
adapter from the bottom of the camera by
removing two fixing screws. Attach the mount
adapter to the top as shown in the diagram,
then mount the camera on the mounting
bracket. Make sure that two original screws
are used when mounting the mount adapter;
longer type screws may damage inner com-
ponents.
i
Video Output Jack (VIDEO OUT)
Connect this jack (
φ
2.5 mm mini jack) with the
control monitor to adjust or confirm settings
such as the pan angle or focus.
o
Coaxial Cable Connector
Connect a coaxial cable (to be procured
locally) between this connector and the CAM-
ERA IN connector of the specific monitor (or
Camera Drive Unit).
Monitor supplies power to the camera, and
the camera supplies the video and audio out-
put to the monitor through the coaxial cable.
!0
Rear Cover
The rear cover can be removed to gain
access to the switches.
ON
OFF
POWER
VIDEO OUT
VIDEO OUT
Control Monitor
VIDEO IN
Rear Cover
!1
Automatic Light Control/Electronic Light
Control Selector (ALC, ELC)
Select the mode according to the lens type
that is used with this camera.
ALC:
Select this mode when an auto iris lens
(ALC lens) is used with this camera.
ELC:
Select this mode when a fixed iris lens
or manual iris lens is used with this cam-
era.
!2
Detail/Aperture Level Selector
(SOFT, SHARP)
The detail/aperture level can be selected with
this selector. Set it to the desired position
while observing the picture on the monitor.
SHARP:
Normal position.
SOFT:
Select this position when a Quad
System is connected to this camera.
!3
Back Light Compensation Mode Selector
(BLC ON, OFF)
Select the mode according to the position of
the object and light conditions.
ON:
Select this mode when a strong light
such as a spotlight is in the background.
OFF:
Normal picture.
!4
Microphone ON/OFF Selector
(MIC ON, OFF)
Select on or off according to need.
!5
Power Indicator (POWER)
Lights when power is supplied.
!65
Microphone Volume Control (VOLUME)
Adjust to prevent howling.
This control is preset in the Centre position at
the factory.
