18
Operation
• If manual recording and a recording whose priority
is the same as the manual recording (for example,
schedule recording whose priority is set to "4" and
whose recorded pictures are set to be stored in the
protected disk space) are performed, pictures of
the recording that started later will be recorded at
its recording interval.
• Depending on the setting of "Minimum Access
Interval/Maximum Frame Rate", the recording inter-
val will be different from the examples above.
Refer to page 63 for further information.
To stop recording, click the [
■
] button.
Notes:
Manual recording will be stopped in the following
cases. It is impossible to stop recording by closing the
window of a web browser or by shutting down the web
browser.
• When another user accessing the camera while it
is recording clicks the [
●
] button.
• When an administrator stops or restarts the WV-
AS710 (Recording will not resume automatically
after restart.)
Zoom
Click the [WIDE] button or the [TELE] button to control
the zoom lens of the selected camera.
Note: Even if the [WIDE] button or the [TELE] button is
kept pressed, the camera will not keep on zooming.
Preset
Select a preset position to move the camera to the
selected preset position. Preset position numbers 1 to
64 and home position are available for this function.
The available preset position numbers differ depending
on the model of the selected camera as below:
A camera connected by the WJ-NT104: 1 to 64
WV-NM100: 1 to 8
WV-NS324: 1 to 16
Note: The preset function is a function of the camera,
not of the network camera server. If the preset
position is not set on the camera, this function is
not available.
Pan/Tilt
Click this button to move the camera horizontally or
vertically. Each click moves the camera horizontally or
vertically by one step. The speed of panning and tilting
and the range of a step differ depending on the model
of the selected camera.
When the selected camera is delivering JPEG:
When one of the edges (top, bottom, left, right) of
the camera picture is clicked, the camera pans or
tilts toward the clicked direction. (When browsing
MPEG-4, panning and tilting by clicking on the
camera picture is not possible.) The range of pan-
ning and tilting by one click differs depending on
the distance between the center point and the
clicked point. For example, if you click the right
edge, the camera pans widely toward the right
side. Tilting is performed in the same way as pan-
ning. The camera will not move if the clicked point
is just around the center point.
Notes:
• Even if a point on the camera picture or the arrow
buttons of "Pan/Tilt" is kept pressed, the camera
will not keep on moving.
• Panning and tilting is possible only when one of the
following cameras is selected:
• Camera connected by the network interface unit
WJ-NT104
• WV-NM100
• WV-NS324
Auto Pan
Click the [ON] button to start the AUTO functions set
on the cameras (AUTO PAN, SEQ, SORT, PATROL
and so on). The available functions differ depending on
the settings of the cameras. Refer to the operating
instructions of the cameras for further information. The
way of panning differs depending on the model of the
selected camera.
Click the [OFF] button to stop the AUTO functions.
Clicking other buttons (except the [
●
] button or the [
■
]
button of "Manual Recording") also stops the AUTO
functions.
Scan
When the [PRESET TOUR] button is clicked, the cam-
era starts touring the preset position number 1 to 8 in
numerical order and stops automatically.
When the [ONE TIME PAN] button is clicked, the cam-
era starts panning once to the right end and once to
the left end, and then stops automatically.
