Daily Care and Maintenance
30
If white lines appear or the image is completely blank,
clean the white balance area.
1
Move the scanner to the center of the white-
board.
2
Gently wipe both sides of the white balance
area with a water-dampened cloth that has
been thoroughly wrung.
Note
•
Do not use thinner, benzene, or cleaners
containing abrasives as this may result in
discoloration.
3
Move the scanner to the home position.
If black lines appear or the image is very dark, clean
the scanner lens.
1
Lift the scanner.
2
Gently wipe the scanner lens with a water-
dampened cloth that has been thoroughly
wrung or a cotton swab.
3
Move the scanner to the home position.
Note
•
Gently place the scanner back down. Dropping the
scanner may result in injury or damage the unit.
Cleaning the White Balance
Area
Panaboard
White line
White Balance Area
Cleaning the Scanner
Panaboard
Black line
Scanner Lens
