Panasonic Workio DP-C405, Operating Instructions Manual

Page: 48 / 100

48
Chapter 2 More Menus Features
„
Job Build
This is useful for copying multiple sets of originals that exceed the maximum capacity of the ADF of
100 sheets (20 lb/Letter). (See the example below.)
Ex : To make 5 sets of sorted copies of 115-sheet of originals.
(a) Place the first 100 sheets of originals on the ADF.
(b) Select “ 2-Sided / Original->Copy ”, and then select “ Job Build and SADF ”.
(c) Select “ Sort / Finish ”, and then select the desired Sorting/Finishing end result.
(d) Enter 5 for the number of copies.
(e) Press the Start key.
(f) After scanning the first 100 sheets, you can place the remaining 15 sheets of originals on the ADF
within 5 seconds to continue copying without interrupting the cycle.
If you do nothing, the machine will display the message “Another original?”.
(g) Place the remaining 15 sheets of originals on the ADF, and then select “ Yes ”.
(h) After scanning the remaining 15 sheets, the message “Another original?” will be displayed. Select
“ No ” to start the printing process.
z
Originals should be placed on the ADF.
z
Up to 999 sheets of originals can be scanned in one job.
The maximum capacity of the scanned data can be reached less than 999 sheets of originals depending on the
type of sheets being scanned.
If the memory becomes full during scanning, follow the instructions on the display.
100
1
115
1
115
101
Originals:100 sheets <1st scan>
Originals: Remaining 15 sheets <2nd scan>
The 1st and 2nd scanned data
are combined into one job.
5 sets of 115-sheet sorted
copies are printed.