Replacing Consumab
les
82
ATTENTION
1
●
Do not reuse toner from the Toner Waste Container.
●
Do not use the Cleaner if it is dirty.
●
When the Toner adheres to the machine, wipe it off with a cloth.
Replacing Toner Waste Container / Cleaning the LSU Aperture Glass
Open the Front Cover.
Front Cover
Toner Waste Container (old)
●
Exercise care not incline the container,
or Toner may spill.
Always clean the LSU Aperture Glass at the same time the Toner Waste Container is replaced.
2
Open the box, and carefully unzip the
plastic bag. Pull the new Toner Waste
Container out of the box and remove
the plastic wrapping (it will be reused
in step 4) covering the new container.
4
Place the old Toner Waste
Container on top of the opened
Front Cover.
Cover the old Toner Waste
Container with the plastic wrapping
which was removed in step 2.
3
Pull out the old Toner Waste Container
out of the machine.
5
Place the old Toner Waste Container
inside the box, and zip the plastic bag
closed.
Plastic Wrapping
Close Plastic Bag
Plastic Wrapping
●
For disposal or recycling information, contact
your local authorities, or your local waste
officials.
008Basic_OP(UK)076_089.pmd
16/11/2006, 13:09
82
Summary of Contents for WORKIO DP-C213
