Panasonic WORKIO DP-C213 Operating Instructions Manual Download Page 45

Page: 45 / 112

Scanning/

Email

SD Card Slot

Select "

Address Book

", and then select

the destination for the scanned data.
(PC or SD Memory Card)

●

When transferring the data to a SD Memory
Card, select "

SD Card / Hard Drive

" and

select "

SD Card

" for your destination.

Push on the Slot Cover to open it.

Label side up

When transferring the data to SD Memory Card.

Push on the SD
Memory Card to
release it.

Pull out the SD
Memory Card.

For SD Memory Card

After the transfer is completed, remove
the SD Memory Card from the Card Slot.

Insert the SD Memory Card as illustrated.

●

When scanning from the Platen Glass, place the
next original, and follow the instructions
described on the touch panel display.

●

The scanned data is transferred to the PC, or
following directory of the SD Memory Card.
Directory:\PRIVATE\MEIGROUP\PCC\DI\IMAGE

●

When the scanned data is transferred to a PC, the
scanner reception notice appears on the PC's
monitor.

●

For more details, refer to

Scanner Settings

in the

Document Management System (For Communications
Utility) on the provided CD-ROM.

Close the Slot
Cover.

Slot Cover

●

Do not remove the SD Memory Card while
the Access Indicator flashes.

●

When re-inserting the SD Memory Card into
the slot, please pull it out completely.

Access Indicator

Select "

SD Card

●

After selecting the destination, the
display will be changed to "

Basic

Menu

" screen automatically.

●

Only one storage device can be
selected at a time. When the "

Card

" is selected as a storage device,

the scanned image cannot be saved
to the "

PCMCIA/PC

", or hard disk at

the same time.

●

If the setting of Function Parameter "

SD/PC Card Function

" (General

Settings > Key Operator) is set to "

the

Confirmation

screen displays

Function not available

" error

message and beeps.

Memory Card

Press the

Start

key.

●

If you do not touch any key for 3 seconds, or
select "

Close

" on the touch panel display,

the machine will display the previous screen.
For more details, refer to

General Settings

in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.

004Basic_OP(UK)044_051.pmd

16/11/2006, 13:07

Summary of Contents for WORKIO DP-C213

















































































































Search results

Summary of Contents for WORKIO DP-C213

Reviews:

Related manuals for WORKIO DP-C213

Brands by name

Popular brands

Panasonic WORKIO DP-C213, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C213

Reviews:

Related manuals for WORKIO DP-C213

Brands by name

Popular brands