Panasonic WORKIO DP-8035, Operating Instructions Manual

Page: 173 / 196

173
Setting
Y
our Machine
No. Parameter Setting Comments
170 SMTP Authentication Invalid If you transmit to the SMTP server, user name and password are used for
Valid authentication. Selecting “ Valid ” allows you to set up the user name and
password.
171 POP Before SMTP Invalid If you transmit to the SMTP server, POP user name and POP password are
Valid used for authentication.
172 Direct IFax XMT Invalid Selecting whether to be prompted during Address Book registration if the
Valid station you are programming is to receive Internet Fax directly without going
through a Mail Server.
173 Delivery Notice Off Setting the home position of whether to request a Message Disposition
On Notification (MDN) for a delivery processing confirmation indicating that the
message (email) was read, when sending an email/Internet Fax. This setting
will be the default value for the “ MODE SETTING ” “ SELECT MODE ”.
174 APOP Authentication Invalid This parameter allows you to encrypt the protocol for the POP password
Valid security when connecting with the POP server.
177 XMT File Type TIFF Selecting whether the document(s) are converted into a TIFF-F or PDF
PDF format when sending an Internet Fax. (The setting can be temporarily changed
when sending an Internet Fax.)
Note: PDF file is only available if sending the document(s) to a PC.
182 Send Comm. JNL Print Select a communication journal output method.
Email Print : A communication journal is printed.
Both Email : A communication journal is transmitted by Email.
(See page 176)
Both : A communication journal is printed and also transmitted by Email.
NOTE
1. The factory standard and the current settings are also shown on the Fax Parameter List printout. To
print the Fax Parameter List, see page 182.