Panasonic Workio DP-1820P, Operating Instructions Manual

Page: 145 / 202

145
Set
ting
Y
our Ma
chine
024 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed : Reduce received document according to setting of
Fax Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
*2 Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print reduction
is selected on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
027 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled document
in memory even after the document is polled once.
2 Valid
028 STAMP AT MEMORY
XMT
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel)
*2 Valid
031 INCOMPLETE FILE
SAVE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 Valid
033 XMT REDUCTION 1 Invalid Selecting whether the machine performs reduction when
the transmitting original is wider than the recording paper
used at the receiving machine.
*2 Valid
036 RING PATTERN
DETECT (DRD)
(See Note 2)
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1 : A Standard ring pattern.
2 : B Double ring pattern.
3 : C Triple ring pattern (Short-Short-Long).
4 : D All other triple ring patterns, except the
type C described above.
037 RECEIVE TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown on
the LCD display.
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 150)
039 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
042 CONF. POLLED FILE
SAVE
*1 Invalid Selecting whether the machine saves the confidential polled
file even after the file is polled once.
2 Valid
043 PASSWORD-XMT *1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting.
2 On
044 PASSWORD-RCV *1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving.
2 On
046 SELECT RCV *1 Invalid Selecting whether the machine performs selective
reception. (See page 94)
2 Valid
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...