Panasonic Workio DP-1820E Operating Instructions Manual Download Page 186

Page: 186 / 202

186

Appendix

FCC Notice for Users in USA

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

Operating Guide, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his/her own expense.

Any unauthorized changes or modifications to this equipment would void the users authority to operate this

device.

Warning:

To assure continued compliance, use only shielded interface cable when connecting the
facsimile machine parallel interface port to host computer. Also, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Note:

For Technical Support, please contact your Authorized Panasonic selling dealer.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

On the rear panel of this equipment is a label that contains, among other information, a product

identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

Ask your telephone company or installer to install the jack suitable for your device if such is not available.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply

with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord

and modular plug is provided with this product. It is designed to be connected to a compatible modular jack

that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive

RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but

not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local telephone company. The

REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

If your telephone equipment causes harm to the telephone network, the Telephone Company may

discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn't

practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with

FCC.

Your telephone company may make changes in it's facilities, equipment, operations or procedures that

could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you

an opportunity to maintain uninterrupted telephone service.

Responsible Party:

Matsushita Electric Corporation of America

One Panasonic Way, Secaucus, NJ 07094

FCC Inquiries Only:

Panasonic Digital Document Company/Technical Support Department

Two Panasonic Way, Secaucus, NJ 07094

1-800-225-5329 (see

Note

below)

Email:

[email protected]

Summary of Contents for Workio DP-1820E











































































































































































































Search results

Summary of Contents for Workio DP-1820E

Reviews:

Related manuals for Workio DP-1820E

Brands by name

Popular brands

Panasonic Workio DP-1820E, Operating Instructions Manual

Search results

Summary of Contents for Workio DP-1820E

Reviews:

Related manuals for Workio DP-1820E

Brands by name

Popular brands