AUDIO IN connectors
–10 dBv 51 k
Ω
, unbalanced, x16 (CH1 - 6: RCA, CH7 - 16,
D-SUB 25-pin)
Audio
AUDIO OUT connector
–10 dBv 1 k
Ω
, unbalanced, x 1 output (RCA)
External AUDIO IN connector
–52dBv 2.2 k
Ω
, unbalanced, x1 input (RCA)
ALARM IN
Non-voltage make contact, pulse width 100 ms or more,
x16 input (D-SUB, 25-pin)
Alarm
ALARM OUT
Normally open/Normally closed/Common, 1A 30 V DC max.,
4 each output (D-SUB, 25-pin)
10BASE-T/100BASE-TX x1 (RJ-45)
Network (10/100BASE-T) port
RS485 x1 (RJ-11)
RS485 (CAMERA) port
RS485 x1 (RJ-11) (Currently unavailable)
Data port (DATA)
SERIAL interface, x2
COPY port
MPEG-4
Field (704 x 288), SIF (352 x 288)
Max. 25 ips (for each channel)
Image compression method
Resolution
Rec. Frame Rate
Input/Output
Function
Video
VIDEO IN connectors
Composite video input signal
1 V[P-P]/75
Ω
, x16 input
(BNC) Control-signal multiplex x4 input (CH1–CH4)
*CH5 - CH8 (when an optional board is installed)
VIDEO OUT connectors
Composite video output signal 1 V[P-P]/75
Ω
, x1 output
(BNC)
Active-through output 1V[P-P]/75
Ω
x4 output (CH1 - CH4)
Loop-through output (auto termination) 1V[P-P]/75
Ω
x12
output (CH5 - CH16)
* When an optional board is installed
Active-through output 1V[P-P]/75
Ω
x8 output (CH1 - CH8)
Loop-through output (auto termination) 1V[P-P]/75
Ω
x8
output (CH9 - CH16)
Monitor terminal (VGA)
RGB output x1 (D-SUB, 15-pin)
STANDARD ACCESSORIES
CD-ROM* ............................................................................................................. 1 pc.
Installation Guide .................................................................................................. 1 pc.
* The following are included on the CD-ROM.
• Operating instructions of the monitoring software (PDF)
• Monitoring software (RT4Client)
Power cable ........................................................................................................ 2 pcs.
HDD mounting screw, sleeve, damper for the WJ-RT416K .................... 24 pcs. each
HDD mounting screw, sleeve, damper for the WJ-RT416 ...................... 20 pcs. each
Rack mounting brackets .................................................................................... 2 pcs.
Fixing screw for rack mounting brackets ........................................................... 8 pcs.
