– 6 –
Fig 2-4
8
Connect the Extension Cable
A
between CN403 on the
Main Board and CN403 on the Front Board.
8
Connect the Extension Cable
B
between CN501 on the
Analog Board and CN601 on the Motion Detector Board.
8
Connect the Extension Cable
B
between CN502 on the
Analog Board and CN101 on the Motion Detector Board.
3. Connection and Setting Up for
Adjustment
3.1. Connection
8
Fig. 3-1 shows the connecting diagram for adjustment of
the WJ-HD500.
Fig 3-1
8
Connect the Underscanned Colour Video Monitor through
the Waveform Monitor to the Multiscreen Output
Connector or Spot Output Connector on the Rear Panel of
the WJ-HD500.
8
Terminate the input terminal of the Underscanned Colour
Video Monitor with 75
Ω
.
8
Connect the Video Signal Generator to the Video Input
Connector on the Rear Panel of the WJ-HD500.
8
Connect the probe of the Oscilloscope, the Frequency
Counter and the Digital Voltmeter at the desired Test Point
in each adjustment step.
3.2. Setting Up
8
Turn on the power.
8
Press the Setup/Escape Button (SET UP/ESC) for two
seconds or more, and the WJ-HD500 SETUP menu as
shown in Fig. 3-2 will appear on the monitor screen.
Fig 3-2
8
Move the cursor to SYSTEM SETUP by pressing the
Direction Buttons (
D
or
C
), then press the Set Button
(SET). The SYSTEM SETUP menu as shown in Fig. 3-3
will appear on the monitor screen.
Fig 3-3
8
Move the cursor to USER DEFINED SETUP by pressing
the Direction Buttons (
D
or
C
).
8
Select SAVE by pressing the Increment/Decrement
Buttons (+ or –), then press the Set Button (SET). The
USER DEFINED SETUP menu as shown in Fig. 3-4 will
appear on the monitor screen.
VIDEO IN
MULTISCREEN
OUT
SPOT
OUT
WJ-HD500
Video Signal
Generator
Waveform
Monitor
Underscanned
Colour Video Monitor
75
Ω
WJ-HD500 SETUP *.**
TIMER OFF
REC SETUP
COMMON SETUP
*MANUAL WITHOUT AUDIO
*TIMER WITHOUT AUDIO
*EMERGENCY WITHOUT AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
LANGUAGE ENGLISH
9 SYSTEM SETUP
CLOCK JAN 1.00 0:00
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL *****
OPERATION *****
BUZZER ON
USER DEFINED SETUP *LOAD
DISK MANAGEMENT
ERROR REPORT
SYSTEM INFORMATION
Remove three screws.
Main Board
Motion Detector
Board
Analog Board
