Panasonic WJHD316 - DIGITAL DISK RECORDER, Operating Instructions Manual

Page: 19 / 154

19
When recording with higher priority than manual recording
is performed, manual recording will not be performed until
this recording finishes.
Refer to the following about the recording mode.
x
Stop recording.
Press the REC button down for around 2 seconds.
The indicator on the button will go off and recording will
stop.
Notes:
• A camera selection button will light orange (currently
being recording) or blue (currently being recorded and
displayed on the monitor) to indicate which camera is
being recorded.
• When recording with other recording mode is being
performed, the indicator on the REC button will not go
off even though the REC button is pressed to stop man-
ual recording.
Do the followings to recordmanually.
Refer to a system administrator about the required settings
for manual recording.
z
Start recording.
Press the REC button to start recording.
The indicator on the button will light and recording will start.
Images from all the connected cameras will be recorded
with the default setting.
It is possible to record only images displayed on the moni-
tor 2 and the VGA monitor by changing the setting.
c c v
R
2
R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPY DISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16
BUSY
316
REV FWD
STOP PLAY PAUSE REC - REC STOP
SEARCH
SETUP
/ESC
PAN/TILT
SLOW
A-B
REPEAT
GOTO
LAST
LISTED
PAN/TILT
ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
RECORDING (Manual Recording)
●
Recording Mode and Priority
There are 4 recording modes as follows.
Recording Mode Description Priority*1
Emergency Recording Start recording manually using an external switch at an emergency event occurrence 1
Event Recording Recording will be performed automatically at an event occurrence 2
*2
Manual Recording Start and stop recording manually 3
*2
Scheduled Recording Recording will be performed with a designated start/stop time and date automatically 4
*2
*1: Priorities on the above table are the default settings. (Emergency recording is the highest priority.)
*2: Priorities for manual recording, scheduled recording and event recording can be changed. Refer to a system administrator
about the settings.