5.2 Using the Maintenance Screen
5.2.1 Confirming the coaxial - LAN converter’s Status
You can confirm the information in the table below, such as the firmware version, MAC
address of the coaxial - LAN converter, and the connection status of other coaxial - LAN
converters on the [Status] screen.
1.
Access the maintenance screen of the coaxial - LAN converter.
2.
Click [Status].
WJ-PR204
The screen shown above is the maintenance screen of the receiver side unit.
IMPORTANT
•
The screen shown here depicts the screen shown when accessing a receiver
side unit. The screen displayed for the receiver side unit and camera side unit is
different. [PLC link status] and [MAC address of the Master] are displayed on the
camera side unit’s screen.
Items
Description
Boot version
Displays the coaxial - LAN converter’s boot version.
Firmware version
Displays the coaxial - LAN converter’s firmware version.
Operation mode
Displays the coaxial - LAN converter type (receiver side unit or
camera side unit). Camera side units are displayed as [Terminal],
and receiver side units are displayed as [Master].
MAC address of the
PLC adaptor
Displays the MAC address of the connected coaxial - LAN
converter.
Other master
Indicates whether other receiver side units exist on the network.
If other receiver side units exist on the network, [Detected] is
displayed, if they do not exist, [Not Detected] is displayed.
Communication performance may be affected if other receiver side
units are detected.
Operating Instructions
47
5 Maintenance Screen of coaxial - LAN converter
Summary of Contents for WJ-PR204
Page 58: ...58 Operating Instructions Notes...
