Note
•
When mounting the receiver side units, place one of the units to either the
left or right edge and connect then connect the units.
•
The BY-HCA10A rack mount bracket comes with 2 underside continuous
connecting bracket and 32 screws (flat-head: M3
6 mm {1/4 inches}). When
connecting 3 units together, use 1 underside continuous connecting bracket
and 12 screws (flat-head: M3
6 mm {1/4 inches}). Keep the remaining parts.
•
Connecting 4 receiver side units
(Recommended torque 0.7±0.3 N·m {0.52±0.22 lbf·ft})
Flat-head (M3
×
6 mm {1/4 inches}:
Rack mount connecting fitting (accessory))
×
16
Underside continuous
connecting bracket
(Rack mount connecting
fitting (accessory))
Note
The BY-HCA10A rack mount bracket comes with 2 underside continuous
connecting bracket and 32 screws (flat-head: M3
6 mm {1/4 inches}). When
connecting 4 units together, use 1 underside continuous connecting bracket and
16 screws (flat-head: M3
6 mm {1/4 inches}). Keep the remaining parts.
Operating Instructions
27
3 Mounting the Unit
Summary of Contents for WJ-PR204
Page 58: ...58 Operating Instructions Notes...
