16
17
[Setup via recorder's main monitor]
[People counting]
Set up areas to count people. The number of people
will be targeted for counting when a person appears
in the area. The number will be counted when the
person moves outside of the image.
Limit the people counting area on the entrance or a
reception area in a store to avoid counting the same
person repeatedly.
Step 1
Click the [Fix area >] button of "People counting" on
the business intelligence setup page (
☞
→
The window for setting up the people counting
area will be displayed.
The following are displayed on the image display
area.
Green frame:
Face detection (The frame will be
updated every second.)
Aqua frame:
Face matching / age and gender
judgment area (
☞
Step 2
Click the [Fix area] button next to the respective peo-
ple counting area. A maximum of 4 areas can be reg-
istered to allow for polygonal shapes.
Note:
• It is recommended to select such places as the
entrance or the reception area in a store where
the same person does not appear repeatedly in
the area.
• Configure the setting so that the people counting
area is included in the face matching / age and
gender judgment area.
Step 3
On the displayed image, click the top left corner and
bottom right corner of the square that will become
the area.
→
The designated area will turn gray and will be reg-
istered as a people counting area. If even part of
the green frame is overlapped with the people
counting area, the portion within a green frame
will be set to count the number of people.
Step 4
To complete the settings, click the [Back] button.
→
The screen returns to the business intelligence
setup page.
Note:
• As each area will be set up to match the image
display area divided into 16×16 segments, the top
left and bottom right detection areas may not be
exactly as designated.
• To delete a registered area, click the [Delete area]
button for the area to delete.
People counting