Panasonic WJ-NXF02, Operating Instructions Manual, Page: 12 / 27

12 13
[Setup via recorder's main monitor]
Click the [Registration >] button to display the face registration window.
Register face images [Face registration]
Use this page to register new face images, to check already registered face images or to assign names to the
face images.
Note:
• Face images can be registered only on images
recorded when "On" is selected for "Face match-
ing alarm" (
☞
Page 11).
●
[Add >] button
Register new face images. (
☞
Page 13)
●
[Sensitivity(All)]
Set the sensitivity level of the face matching to be
applied to all face images.
1(Low)/ 2/ 3/ 4/ 5(High)
Default: 3
●
[Face image]
This is the area where registered face image is dis-
played.
●
[Appearance]
Displays the date & time when a face image
appeared.
●
[Name]
Enter the name to be assigned to the face image (in
up to 12 characters) using the on-screen keyboard (
☞
operating instructions of the recorder).
●
[Matching]
Select whether or not to activate the face matching
function.
On:
Activates the face matching function.
Off: Does not activate the face matching function.
Default:
Off
●
[Sensitivity]
Set the sensitivity level of the face matching for each
face image.
1(Low)/ 2/ 3/ 4/ 5(High)
Default:
3
●
[Delete]
To delete images, mark their checkboxes.
●
[Update] button
Use this button to register or delete the changes
made to the image, the assigned name and the set-
ting for face matching actions.
●
[Undo] button
Use this button to undo the changes made to the
image, the assigned name and the setting for face
matching actions, and to return it to the state it was in
when last clicking the [Update] button. Once the
[Update] button has been clicked, the state before
updating cannot be restored. In addition, a face
image once deleted cannot be restored.
●
[Setup area >] button
The window for setting up the matching area will be
displayed. (
☞
Page 14)
●
[Back] button
Return to the "Business intelligence" set up page.