30
31
Set the automatic slow shutter of the camera [Auto slow shutter (Maximum
shutter)]
Select the auto slow shutter setting for each camera and transmit the information to the cameras to change the
camera settings.
Clicking the [Setup >] button for "Auto slow shutter (Maximum shutter)" on the [Camera setup] tab will display
the setup page.
[Auto slow shutter (Maximum shutter)]
The auto slow shutter adjusts the sensor storage time
to enhance the electronic sensitivity.
The following are available setting values.
Off (1/30s)/ Max. 2/30s/ Max. 4/30s/ Max. 6/30s/
Max. 10/30s/ Max. 16/30s
■
Camera Selection
Select the camera to which the setting of the "Auto
slow shutter" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Auto slow shutter" to the
camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Important:
• When the auto slow shutter is set, the frame rate
may drop. Noise or white dots (scratches) may
also be seen in image.
Note:
• When "Max. 16/30s" is selected, the electronic
sensitivity will automatically be enhanced up to 16
times.
• When "Off" is selected for "AGC", this function is
not available. Refer to the operating instructions
of the camera for further information.
[Setup via recorder's main monitor]
