WJ-ND300 SATA conversion guide (single)
Maintenance guide
8
Panasonic
ND300_SATAConversionGuideS_A
(17) Install three additional hexagonal spacers (7mm).
(18) Attach the new cool sheet to the Main board (Center of
IC103).
(19) Meeting the hexagonal spacers, install the SATA board
mounting bracket with four screws (1x wafer-head screw,
3x screw with washer).
(20) Install the SATA board with additional four screws.
Note:
Circled tapped holes on the SATA connector side are not
necessarily screwed.
(21) Remove two cord clamps from the HDD Fan Ass’y, and attach four new cord clamps.
Note:
Peel off the double-sided tape, not leaving any portion.
additional
Hexagonal spacer
three screws (7mm)
SATA board
mounting bracket
SATA boards
additional four screws
(screw with washer)
New
cool sheet
Main board
IC103
wafer-head
screw
screw with washer
Remove
two cord clamps
Attach four new cord clamps
HDD Fan Ass'y
20mm
10mm
10mm
unites with a
left end.
