Panasonic WJ-ND300 Administrator Console, Maintenance Manual

Page: 15 / 15

WJ-ND300 SATA conversion guide (single)
Maintenance guide
15 Panasonic
ND300_SATAConversionGuideS_A
(41) Attach the Caution label to the specified location on the
HDD unit.
(42) Install the top cover on the main unit with 11 screws.
(43) Connect the connector to the front panel and fix the front panel with one screw in the reverse order of the removal.
(44) Attach the SATA label, large (for top) to the top panel.
Attach the SATA label, small (for front) to the front panel.
Note:
The new HDDs need to be formatted before operation. Refer to the Operating Instructions for detail.
+++++++++++++++++++++++++++++++++++++
End of the document
+++++++++++++++++++++++++++++++++
ALA
RM
OPER
ATE
ALA
RM
SUS
PE
NDED
ERR
OR
TIM
ER
REC
LINK
1
LIN
K 2
HD
D 1
HDD
2
HDD
3
ESC
Netw
ork D
isc Re
corde
r
WJ-ND
300
SET
HDD
4
Connectorscover
Screw
Front panel
connector
Front panel
connector
A
7-10mm
3-5mm
SATA label(for top)
SATA label(for front)
Appr
ox.
15mm
Appr
ox. 15mm
Caution label