37
STANDARD ACCESSORIES
CD-ROM* ............................................................................................................ 1 pc.
Installation Guide (this manual) ............................................................................ 1 pc.
The following are for installation:
Power Cord ....................................................................................................... 1 pc.
Rack Mounting Bracket ................................................................................... 2 pcs.
Screw for Rack Mounting Bracket ................................................................... 4 pcs.
Screw for Rack Mounting (tapping screw, nominal diameter: 5) .................... 4 pcs.
Hard Disk Drive Fixing Screw (w/sleeve and damper). ................................... 4 pcs.
*The following are included on the CD-ROM:
Operating Instructions (PDF)
Setup Instructions (PDF)
High-speed serial interface, 480 Mbps (theoretical value), x1
General
SPECIFICATION
Power source
Power consumption
Ambient operating
temperature
Ambient operating
humidity
Maximum operating
altitude
Dimensions
Weight
Input/Output
External storage
Alarm/Control
connector
Alarm connector
120 V AC, 60 Hz
85 W
+5 °C to +45 °C (41 °F - 113 °F)
Less than 85 %
2 000 m (610 feet) above sea level
420 mm (W) X 88 mm (H) X 350 mm (D) {16-9/16" (W) X 3-7/16" (H) X
13-3/4" (D)} (excluding rubber feet and projections)
8.3 k
g
(18.3 lbs.)
Emergency recording input *
1
, Alarm output for available disk space of
the copy/event recording area*
2
, HDD error output*
2
, Camera error out-
put*
2
, Error output*
2
, Power outage recovery completion output*
1
, Time
adjustment input/output*
4
, Power outage detection input*
1
, External
recording mode switching*
1
, Alarm output 8-16*
2
, Alarm suspension
input*
1
, Alarm reset input*
1
, Network error input*
2
, +5 V output*
5
(D-sub 25-pin)
Alarm input 1-16*
1
, Alarm output 1-7*
2
(D-sub 25-pin)
Camera port/client
PC port
Maintenance port
10 Base-T/100 Base-Tx (RJ-45)
10 Base-T (RJ-45)
*
1
: Non-voltage make contact, 100 mA, +5 V pull-up
*
2
: Open collector output, maximum under conditions of 24 V DC and 100 mA or less
*
3
: HIGH (+5 V - +12 V, 6.3 mA max.)
*
4
: 52 k
Ω
, 5 V pull-up, -100 mA/make contact
*
5
: 200 mA max.