31
In the map, the icon
indicates the registered recorder. The icon
indicates that the channel (camera) is
connected (active). The icon
indicates that the channel (camera) is not connected (not active).
When the icon
(not active) is right-clicked, the pop-up menu will be displayed. Select "Connect" on the pop-up
menu to activate the channel (establish the connection). Refer to "Remote Monitoring" on page 8 for further informa-
tion.
When "Connect" is selected, the progress bar for the connection of the channel will be displayed. If eight channels
are already in use or when no available area on the image display area, it is impossible to establish the connection.
When the icon
(active) is right-clicked, the pop-up menu will be displayed. It is possible to disconnect the
selected channel by selecting "Disconnect" on the pop-up menu.
When the "ElectroMap" window is open, images from the channel displayed in the "ElectroMap" window are being
displayed in the image display area. The recorder in the "ElectroMap" window and its channels will be displayed in
green highlight. When a channel is selected in the "ElectroMap" window, images from the selected channel will also
be displayed in the image display area with green outline. When a recorder is selected in the "ElectroMap" window,
images from all the channels connected to this recorder will be displayed in the image display area with green out-
line.
11. Sequential Display
It is possible to display images from multiple cameras sequentially using this function. Before starting sequential dis-
play, it is necessary to close the remote playback window, and then click the [Sequential Display] button
on the
system control panel.
When the [Sequential Display] button is clicked, the sequential display function will start and the [Sequential Display]
button will change into the [Sequential Display Stop] button
.
The sequential display function starts displaying images from the channels connected to the first recorder. When the
set dwell time has passed, the sequential display function starts displaying images from the channels connected to
the next recorder. The sequential display function continues until the set total time for the sequential display has
passed.
The sequential display will be paused when alarm recording starts, and resumes when alarm recording ends.
If any error occurs in the connection with the recorder, the sequential display will stop.
When the sequential display button
is clicked in the process of the sequential display, the sequential display will
stop.
Even when the sequential display stops, the currently display images will be kept on displaying.
