Fig.3-2
Fig.4
Fan body
Joist
4-Long screws(M4X30)
Joist
Fan body
2-Long screws
(M4X30)
2-Long screws
(M4X30)
Screw
(M4X10)
II
7
Junction box cover
Fig. 5
Conduit or wiring
Junction box
Lead wires
Green wires
Wire nut
Conduit
Duct
5. Remove junction box cover and secure conduit or
stress relief to junction box knock-out hole. (Fig.5)
6. Refer to wiring diagram of page 4.
Using wire nuts, connect house power wires to
ventilating fan wires:
black to black; white to white; green to green;
Replace the junction box cover.
CAUTION:
Mount junction box cover carefully so that lead
wires are not pinched.
7. Install a circular duct and secure it with duct tape
or clamps.
Fig.3-1
3. Install the suspension bracket and the flange of fan body
to joists by using long screws (M4X30) ( If spacing A
between joists is 12 inches, install the flange of fan body
according to Fig.3-2, others according to Fig.3-1 to install
the product)
4. Install the suspension bracket to joists by using long
screws (M4X30) and secure it to the fan body by
using screw
(M4X10) (Fig.4)
II
Duct tape
