Panasonic VoiceSonic KX-NT700 Operating Instructions Manual Download

Page: 56 / 80

SIP Authentication ID

Description

Available Settings

Default Setting

Set this parameter to match the SIP authentication ID
assigned to the unit through PBX programming.
If this field is left empty, the value set for "

SIP Ext.

No.

" will be used as the SIP authentication ID.

•

If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).

Max. 32 characters

—

SIP Password

Description

Available Settings

Default Setting

Set this parameter to match the password assigned to the
unit through PBX programming.

•

If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).

Max. 32 characters

—

SIP User Domain Name

Description

Available Settings

Default Setting

Set this parameter to match the IP address or domain name
of the IP-PBX.

•

If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).

Max. 64 characters

—

SIP Proxy Server IP Address

Description

Available Settings

Default Setting

Set this parameter to match the IP address of the IP-PBX.

•

If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).

—

0.0.0.0

Operating Instructions

Document Version 2011/06

Programming the Unit

Summary of Contents for VoiceSonic KX-NT700

















































































Search results

Summary of Contents for VoiceSonic KX-NT700

Reviews:

Related manuals for VoiceSonic KX-NT700

Brands by name

Popular brands

Panasonic VoiceSonic KX-NT700, Operating Instructions Manual

Search results

Summary of Contents for VoiceSonic KX-NT700

Reviews:

Related manuals for VoiceSonic KX-NT700

Brands by name

Popular brands