6
the batteries in order to maintain battery
performance and prevent the batteries from
discharging.
– Recharge the batteries before using the sub
monitor again.
Wall mounting
Note:
R
Make sure that the wall and the fixing method are
strong enough to support the weight of the unit.
R
Drive the screws (locally procured) into the wall.
Registering the product to the
Video Intercom System
The operations described here are based on the VL-
SWD275 series main monitor. See the Operating
Instructions of the Video Intercom System for more
information.
When registering the product to a main monitor of a
different series, follow the instructions in the
documentation included with your main monitor.
1
Main monitor:
Press
M
N
→
select
“
Register/Cancel
”
→
.
2
Select
“
Register
”
→
.
R
When you are prompted to register your main
monitor, select
“
Main monitor
”
→
.
3
Select
“
Sub monitor
”
→
.
4
Select the registration number of the sub monitor to
be registered
→
.
R
Complete the following operations within about 2
minutes.
5
Sub monitor:
R
To register a sub monitor for the first time:
When
“
Please register the device.
”
is
displayed on the screen, select
→
.
–
“
Registering completed
”
is displayed.
R
To re-register a sub monitor:
Press
→
select
“
Register
”
→
→
.
–
“
Registering completed
”
is displayed.
6
Main monitor:
Press
M
N
.
Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a cloth slightly
dampened with fresh water.
Cleaning the charger:
For safety, disconnect the charger from the power
supply before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.
Specifications
Main body
*1 When used fully charged in an operating
temperature of 20
°
C.
*2 When the operating temperature is 20
°
C. The
charging time may increase when the operating
temperature is lower than this.
*3 When registered to the main monitor.
25 mm
Power source
Rechargeable battery AAA
(R03) Ni-MH battery (1.2 V,
550 mA)
×
2
Dimensions
(mm) (height
×
width
×
depth)
Approx. 173
×
52
×
30
(excluding protruding sections)
Mass (weight)
Approx. 160
g
(including the
batteries)
Operating
environment
Ambient temperature: approx.
0
°
C to +40
°
C
Relative humidity (non-
condensing): up to 90 %
Display
Approx. 5.6 cm (2.2 inches,
colour display)
Frequency
range
1.88 GHz to 1.90 GHz
RF transmission
power
Approx. 10 mW (average power
per channel)
250 mW (max.)
Talking method
Hands-free
Operating time
*1
Standby use: approx. 80 hours
Charging time
*2
Approx. 8 hours
*3
Transmitting
range
Approx. 100 m (line-of-sight
distance from the main monitor)
WD619-OI_en.book 6 ページ ２０２０年３月１２日 木曜日 午後３時３８分
