background image

5

Repairing, transferring, disposing, or returning the 

product

Requesting repairs for the product

R

Note that the settings of the product may be altered 
or changed to the default settings during repairs.

Note for product disposal, transfer, or return

R

Perform the "Initialize" setting for the product. (

 

See the Operating Instructions of the Video 
Intercom System.)
Settings are returned to their default values when 
initialization is performed.

Information on Disposal in other Countries outside 

the European Union

These symbols are only valid in the European Union. If 
you wish to discard these items, please contact your 
local authorities or dealer and ask for the correct 
method of disposal.

Battery installation

– USE ONLY rechargeable Ni-MH batteries AAA 

(R03) size.

– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– Confirm correct polarities ( ,  ).

Note:

R

Use the supplied rechargeable batteries (Ni-MH 
ONLY). When replacing batteries, we recommend 
using batteries that match the specifications of the 
batteries listed on page 6.

R

Wipe the ends of batteries ( , 

) with a dry cloth.

R

Avoid touching the ends of batteries ( ,  ) or the 
unit contacts.

Charging the sub monitor

Only connect the charger with the supplied Panasonic 
AC adaptor (

 page 2).

*1 Press plug firmly.

R

Connect the charger to the power outlet, and then 
place the sub monitor in the charger to charge it. 
Charging usually takes about 8 hours.

A

 Charge indicator

– when charging: lights
– when charging is completed: off

B

 Hook

R

Charge the sub monitor for at least 15 minutes 
before registering it to the main monitor. Make sure 
to completely charge the sub monitor after the 
registration is completed.

R

Charging may take longer in the following situations.
– When the operating temperature is low. (

 

page 6)

– When the sub monitor is picked up off the 

charger or used during charging.

– When the sub monitor’s signal is out of range 

(

).

R

The sub monitor does not overcharge even if it is 
continuously placed in the charger.

Battery level

R

See page 6 for a guide on operating times for the 
sub monitor.

Note:

R

When the sub monitor is off the charger or the AC 
adaptor is disconnected for 1 week or more, remove 

AC adaptor connections

Icon

Battery level

High

Medium

Low

Needs charging

A

*1

B

WD619-OI_en.book  5 ページ  2020年3月12日 木曜日 午後3時38分

Summary of Contents for VL-WD619









Reviews: