Parameter
Description and available settings
Default
ZOOM POSITION
Determines the camera zoom position.
[01]: UPPER LEFT
[02]: UPPER SIDE
[03]: UPPER RIGHT
[04]: LEFT
[05]: CENTRE
[06]: RIGHT
[07]: LOWER LEFT
[08]: LOWER SIDE
[09]: LOWER RIGHT
05
(
CENTRE
)
SET POWER FREQ.
Tells the system what frequency of power is supplied
to the lobby station.
[00]: 50 HZ
[01]: 60 HZ
00
(
50 HZ
)
SET CAMERA SIGNAL
Tells the system what signal format is used by the
external camera.
[00]: PAL
[01]: NTSC
00
(
PAL
)
SET TIME&DATE
Determines the system’s time and date settings.
1/JAN/2015
00:00
SET TIME OUT
MONITOR TIME OUT
Determines the amount of time that passes when
watching camera images before the standby screen is
displayed.
[00]: 180 SEC
[01]: 90 SEC
[02]: 60 SEC
[03]: 30 SEC
00
(
180 SEC
)
TALK TIME OUT
Determines the amount of time that passes when
talking before the standby screen is displayed.
[00]: 90 SEC
[01]: 60 SEC
[02]: 30 SEC
[03]: 180 SEC
[04]: 300 SEC
00
(
90 SEC
)
SET LIFT
SIGNAL MODE TO LIFT
Determines the signalling method used by the lift
controller to communicate with the lift. Select the signal
type according to the specifications of the lift.
[00]: RELAY
[01]: BINARY
00
(
RELAY
)
SIGNAL TIME TO LIFT
After a visitor is admitted, this setting determines the
amount of time that the visitor can use the lift to visit the
corresponding floor.
If the lift has a similar setting, set this parameter to any
value other than "0"; the lift’s box setting will take
priority.
(
001–900 SEC
, or
000
to disable)
300
(
300 SEC
)
SET ACCESS CODE
Determines the access code that allows you to use
lobby stations to configure the system.
(6 digits)
123456
48
5. Programming
