10
Introduction and Installation
2
Attach the mounting bracket to the wall using the wood screws (3.8 mm x 20 mm,
1
/
8
'' x
13
/
16
'').
L
Before drilling, see page 7 for installation location.
3
Connect the wires that connect to the monitor station to the terminal connector by
unscrewing the screws, pushing in the wires, then tightly fastening the screws.
L
See page 8 for the wire type and distance.
L
You can change the camera angle using the camera angle control lever. See page 7 for
details.
Wood screws
Wall
Mounting bracket
83.5 mm
(3
5
/
16
")
Camera angle control lever
Wire (Not included)
Terminal connector
(Non polar)
Screw
VL-GC001A.book Page 10 Monday, February 28, 2005 12:08 PM
