background image

5

 

 Battery for the Remote Control / 
3D Eyewear / Electronic Touch Pen / 
VIERA Touch Pad Controller

 Caution

 

 Incorrect installation may cause battery leakage, 
corrosion and explosion.

 

 Replace only with the same or equivalent type.

 

 Do not mix old and new batteries.

 

 Do not mix different battery types (such as alkaline and 
manganese batteries).

 

 Do not use rechargeable batteries (Ni-Cd, etc.).

 

 Do not burn or break up batteries.

 

 Do not expose batteries to excessive heat such as 
sunshine, fire or the like.

 

 Make sure you dispose of batteries correctly.

 

 Remove the battery from the unit when not using for 
a prolonged period of time to prevent battery leakage, 
corrosion and explosion.

 

 Electronic Touch Pen Use

 Warning

 

 The TV may be hot. Do not touch it continuously to 
prevent low temperature burn.

 Caution

 

 Do not forcibly hit or pick the TV screen with the 
Electronic Touch Pen to prevent the TV from falling 
over.

 

 Touch the TV screen only with the tip of the Electronic 
Touch Pen, do not move the tip with exerting pressure 
on, or do not move the tip fast to prevent the scratch of 
the screen.

 

 Stop using the Electronic Touch Pen immediately if you 
experience any redness, pain or skin irritation. In rare 
cases, the materials used in the Electronic Touch Pen 
may cause an allergic reaction.

 

 Use the Electronic Touch Pen taking a break 
sometimes. Guideline for continuous use is around 
1 hour to protect against eyestrain or physical 
deconditioning.

 

 Do not use the Electronic Touch Pen at high 
temperatures. Always keep the Electronic Touch Pen in 
a cool and dry place.

 

 3D Eyewear Use

 Caution

 

 Use the 3D Eyewear only for the intended purpose and 
nothing else.

 

 Do not move around while wearing the 3D Eyewear to 
avoid falling or accidental injury.

 

 Do not drop, bend, exert pressure on, or step on the 3D 
Eyewear.

 

 Be careful of the tips of the frame when putting on the 
3D Eyewear.

 

 Be careful not to trap your fingers in the hinge section 
of the 3D Eyewear.

 

 Do not use the 3D Eyewear if it is physically damaged.

 

 If you suffer from any eyesight problems (short / far-
sighted, astigmatism, eyesight differences in left and 
right), ensure that you correct your vision before using 
the 3D Eyewear. The supplied 3D Eyewear can be worn 
over vision correction glasses.

 

 Stop using the 3D Eyewear immediately if you 
experience any redness, pain or skin irritation around 
the nose or temples. In rare cases, the materials used 
in the 3D Eyewear may cause an allergic reaction.

 

 Do not use the 3D Eyewear at high temperatures. 
Always keep the 3D Eyewear in a cool and dry place.

 

 Stop using the 3D Eyewear immediately if a malfunction 
or fault occurs.

 

 Viewing 3D Images

 Caution

 

 Pay special attention when children are viewing 3D 
images. 3D images should not be viewed by children 
younger than about 6 years old, as a guideline. 
All children must be fully supervised by parents or 
guardians who must ensure their safety and health 
while they are viewing 3D images.

 

 Stop viewing 3D images immediately if you feel tired, 
feel unwell, experience any other uncomfortable 
sensation or clearly see double images. Take an 
appropriate break before continuing to view. When you 
set the 3D effect by using [3D Adjustment], take into 
account that the vision of 3D images varies among 
different individuals.

 

 Do not view 3D images if you have a history of 
oversensitivity to light, heart problems or any other 
medical conditions.

 

 When viewing 3D images, your sense of distance may 
be tricked or go wrong. Be careful not to hit the TV 
screen or other people unintentionally. Ensure there 
are no breakable objects around you to avoid any 
accidental damage or injury.

 

 Do not view 3D images from a distance shorter than 
recommended. The recommended viewing distance is 
at least 3 times of the image height.

 

65-inch model

 : 2.4 m or more

 When black bands at the top and bottom of the screen 
are displayed, such as movies, view the screen from 
a distance at least 3 times the height of the actual 
image. (That makes the distance shorter than the 
recommended values above.)

Summary of Contents for Viera VT60P Series

























Reviews: