Panasonic Viera UT50A series, Operating Instructions Manual

Page: 14 / 115

Basic Connection
14
Connections
Mains lead and aerial
Mains lead
Aerial
RF cable
See below “Mains lead”
AC 220-240 V, 50 / 60 Hz
■
TV
Ferrite core - Middle size
(supplied:
)
See below “Ferrite core”
Mains lead
RF cable
Aerial
See below “Mains lead”
AC 220-240 V, 50 / 60 Hz
■
TV
■
Mains lead
Push until both
side tabs click Make sure that
the mains lead is
securely fixed To remove from the TV:
tabs
Press both tabs
and pull on mains
connector to
release
■
Ferrite core
Installing the Ferrite core
Pull back the tabs (in two places) Open Press the cable through and close
Note
● Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
● Do not place the RF cable under the TV.
● To obtain optimum quality picture and sound, an aerial, the correct cable (75
Ω
coaxial), and the correct terminating
plug are required.
●
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
●
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.