background image

 Using Media Player

63

 

 To sort by folder, recorded date or recorded month

 1

  Display the view selection in the thumbnail view

 

 (green)

 2

  Select the sort type

 

   select

   access

 [Folder view]:

 Displays the thumbnail grouped by folder.

 

 The files which are not into a folder will be collected to the folder named “/”.

 [Sort by Date] / [Sort by Month]:

 Displays the thumbnail grouped by the same date or month.

 

 The group of the photos without a recorded date is shown as [Unknown].

 

 To return to the thumbnail of all photos

 

 (green)

 

 

    select [All photos]

   access

 Multi Shot 3D

 This TV can create the 3D photo using a pair of photos in the SD Card and save it into the same SD Card.

 

 This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it.

 

 This function is available with photos recorded by digital cameras.

 

 Depending on the photos you select, the created 3D photo may not be suitable or the 3D photo creation may not 
be possible. It is recommended to take a photo (for L) and then move your camera to the right about 5 cm and take 
another photo (for R).

 

 To view the created 3D photo with 3D effect, you need the 3D Eyewear   

“Optional accessories” (p. 7)

 1

  Display the option menu in the thumbnail view

 

 2

  Select [Multi Shot 3D]

 

 Slideshow Settings

 Multi Shot 3D

 Change Size

 Option Menu

 

   select

   access

 3

  Select two photos for L (left) and R (right)

 

 EXIT

 Select

 RETURN

 Media Player 

 Photo Multi Shot 3D 

All photos

 Select

 Info

 View

 Option Menu

 SD Card

 

 

 

 (red)

 

 You can only select photos of the same recorded date and same 
pixels.

 

 You may not be able to view the created 3D photo properly if you 
select the photos for L and R oppositely.

 4

  Create the 3D photo

 

 

 If your selected photos are not suitable for the 3D photo, the error message will be displayed and 
will return to the photo selection screen (step 3).

 

 To save the 3D photo in the SD Card

 

 

 

The 3D image will be saved onto your media. 

Continue?

 No

 Yes

 

    select [Yes]
   save

 After finishing saving the photo, the photo selection screen will be displayed (step 3). Select 
photos again to create another 3D photo or exit from [Multi Shot 3D] mode.

Summary of Contents for Viera TX-P42XT50Y









































































































Reviews:

Related manuals for Viera TX-P42XT50Y