Panasonic Viera TX-P42V20E Operating Instructions Manual Download Page 37

Page: 37 / 100

Retuning from Setup Menu

●

Advanced

For Auto Setup, using

■

the buttons on the side

panel of the TV

(p. 9)

Press repeatedly until

“Auto Setup” appears

Access “Auto Setup”

Start “Auto Setup”

To return to TV

●

EXIT

INPUT

Select DVB-T or
Analogue

p. 16

Display the menu

Select “Setup”

Main Menu

Picture
Sound

Setup

access

select

Select “DVB-T Tuning Menu” or
“Analogue Tuning Menu”

Setup Menu

1/2

Off Timer

Off

Access
Access

Link Settings
Child Lock

Analogue Tuning Menu

DVB-T Tuning Menu

Language
Display Settings
Common Interface

Timer Programming

USB HDD Setup

access

select

“DVB-T Tuning Menu” is

●

available in DVB-T mode only.

“Analogue Tuning Menu” is

●

available in Analogue mode

only.

Select “Auto Setup”

DVB-T:

access

select

DVB-T Tuning Menu

Favourites Edit
Channel List

Auto Setup

Manual Tuning
Update Channel List

Access

New Channel Message

Signal Condition

Analogue:

Analogue Tuning Menu

Channel List

Auto Setup

Manual Tuning

Access

Start Auto Setup

All DVB-T tuning data will be erased

DVB-T Auto Setup

DVB-T:

DVB-T Auto Setup

Channel Name

Type

Quality

Searching

This will take about 3 minutes.

Free TV: 4

Progress

CH 5

CBBC Channel

Free TV

BBC Radio Wales

Free TV

Cartoon Nwk

Free TV

Pay TV: 0

Radio: 0

All analogue tuning data will be erased

Analogue Auto Setup

Analogue:

Analogue Auto Setup

Channel Name

Searching

This will take about 3 minutes.

Analogue: 2

CH 2

CC 1

CH 29

Scan

CH 33

BBC1

Settings are made automatically

The channel, language, country / region settings are downloaded to

●

a Q-Link or VIERA Link compatible equipment connected to the TV.

When the operation is completed, the channel at channel

position “1” will be displayed.

DVB-T or Analogue channels

Automatically retune all DVB-T or Analogue channels received in the area.

Auto Setup is available if channel tuning is already performed.

●

Only DVB-T channels are retuned in DVB-T mode.

●

Only Analogue channels are retuned in Analogue mode.

●

All the previous tuning settings are erased.

●

If a Child Lock PIN number (p. 46) has been set, it must be entered.

●

To return to TV

■

EXIT

Note

If tuning has not been done

●

completely

“Manual Tuning”

(p. 40 and p. 43)

Summary of Contents for Viera TX-P42V20E





































































































Search results

Summary of Contents for Viera TX-P42V20E

Reviews:

Related manuals for Viera TX-P42V20E

Brands by name

Popular brands

Panasonic Viera TX-P42V20E, Operating Instructions Manual

Search results

Summary of Contents for Viera TX-P42V20E

Reviews:

Related manuals for Viera TX-P42V20E

Brands by name

Popular brands