106
On screen messages
Message
Meaning / Action
Timer already expired !
The starting time in Timer Programming has already passed. Set the
●
timer correctly (p. 53).
Timer Event Due to Start
∗∗∗
:
∗∗∗
has been
programmed for External
(USB HDD) recording at
∗∗
:
∗∗
This message will appear 2 mins. before timer programming event for
●
external (USB HDD) recording due to start.
Timer incorrect !
Set the start and end times in Timer Programming correctly (p. 53).
●
Timer overlap.
Press OK to keep, RETURN to edit.
Timer programming events are overlapped. Press the OK button to
●
keep the overlapped setting. “Ext Rec.” and “USB HDD Rec.” are given
priority over “Reminder”. When two or more “Ext Rec.” / “USB HDD
Rec.” overlap, the first timer programming event starts and finishes as
programmed. The next timer programming event can then start.
Tuner Locked
Press EXIT to unlock and stop recording
If you want to unlock the tuner, cancel Direct TV Recording (p. 88
●
and p. 90), the recording of Timer Programming (p. 53) or One Touch
Recording.
Unable to download, please check
equipment
The tape or disc is active. Stop the equipment and try again.
●
Media Player
■
Cannot read file
The file is damaged or unreadable.
●
The TV does not support the format.
●
(For the applicable formats and data p. 68)
No Device Inserted
Confirm the SD Card or USB device is inserted correctly.
●
No valid file to play
The card has no data.
●
Please confirm the Device is OK
The inserted SD Card or USB device has a problem.
●
This operation is not possible
The selected operation is not available.
●
Network
■
An internal error occurred.
Check the settings. (p. 78 - 81)
●
Cannot read file
The file is broken or unreadable.
●
Check applicable data format. (p. 76)
Communication with the server failed.
This might be a problem of the media server.
●
Read the manual of the server software.
Connection to the server failed.
Check the connections and settings. (p. 77 - 81)
●
Server not found
There are no available media server on your home network.
●
Check the connections and settings. (p. 77 - 81)
The software update is not completed.
Network download failed.
●
Check the connections and settings. (p. 77 - 81)
Ethernet cable not connected
Check the connection of the LAN cable. If you use a hub, also check the
●
light on the hub is lit.
The LAN cable might be defective.
●