manualshive.com logo in svg

Panasonic Viera TX-L42WT50E, Operating Instructions Manual

Share
Download
Panasonic Viera TX-L42WT50E Operating Instructions Manual Download Page 47

How to Use Menu Functions

47

Menu

Item

Adjustments / Configurations (alternatives)

Setup

T

uning Menu

Service 
Replacement

Set to [On] to enable a message to switch to the available service (only available 
in some countries) 

[Off] / [On]

For DVB-C mode

Signal Condition

Checks the signal condition (p. 57)

Not valid on Analogue mode

Antenna System

Sets the antenna system to use plural LNBs for receiving several satellites  

[One LNB] / [MiniDiSEqC] / [DiSEqC 1.0] / [Single Cable]

 (p. 50)

This TV supports DiSEqC Version 1.0.

For DVB-S mode

LNB Configuration

Selects the satellite for each LNB (p. 50)

For DVB-S mode

Attenuator

Automatically reduces the DVB-C signal to avoid the interference 

[Off] / [On]

If the DVB-C signal is too strong, the interference may occur. In this case set to 
[On] to reduce the signal automatically.

Add TV Signal

Adds the TV mode

This function is available if you skip any modes to tune in [Auto Setup] for first 
using the TV.

To operate, refer to the “Auto Setup” operations for first using the TV (p. 16).

Language

OSD Language

Changes language for on-screen displays

Preferred Audio 
1 / 2

Selects the first and second preferred language for DVB multi audio (depending 
on the broadcaster)

Preferred Subtitles 
1 / 2

Selects the first and second preferred language for DVB subtitles (depending on 
the broadcaster)

To display subtitles 

 (p.  22)

Preferred Teletext

Selects the preferred language for DVB teletext service (depending on the 
broadcaster)

Display Settings

Preferred Subtitle 
Type

Selects the preferred subtitle type 

[Standard] / [Hard of Hearing]

[Hard of Hearing] provides aids in understanding and enjoyment with DVB 
subtitles (depending on the broadcaster).

[Preferred Subtitles 1 / 2] in [Language] are given priority.

Teletext

Teletext display mode 

[TOP (FLOF)] / [List] 

(p. 28)

Teletext Character 
Set

Selects teletext language font 

[West] / [East1] / [East2]

[West]:  

English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc.

[East1]:

  Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc.

[East2]:

  Czech, Hungarian, Lettish, Polish, Rumanian, etc.

Default Guide

Selects the default TV Guide type when the GUIDE button is pressed (only 
available in some countries) 

[Channel List] / [TV Guide]

[TV Guide]:

Electronic Programme Guide (EPG) is available.

To use EPG 

 (p. 25)

[Channel List]:

The channel list will appear instead of EPG.

Summary of Contents for Viera TX-L42WT50E





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands