W
atching TV
19
Watching TV
Volume
1
Turn power on
Press for about 1 second.
Mains power On / Off switch should be on. (p. 10)
VIERA Connect introduction banner appears
Every time you turn on the TV, this banner appears at the bottom of the
screen.
You can access to VIERA Connect easily and enjoy the various
contents.
(p. 18)
To remove this banner, leave for about 5 seconds or press any
buttons (except the buttons to access VIERA Connect).
To set this banner display off
[VIERA Connect Banner] (p. 38)
The banner is subject to change.
2
Select the mode
You can also select the mode pressing the TV
button repeatedly on the remote control or the
TV (p. 10).
3
Select a channel
up
down
or
DVB channel position numbers run from 1 onwards.
Analogue channel position numbers run in the ranges
0 - 99.
To select a more than two-digit channel position
number, e.g. 399
To select a channel using Information banner (p. 20)
It is possible to confirm the channel name and programme information by using the Information banner before
changing channels.
1
Display Information banner if it is not displayed
2
While the banner is displayed, select the channel
select channel
watch
To select a channel using TV Guide (p. 23)
It is possible to confirm the channel and programme information by using the TV Guide (EPG) before changing
channels.
1
Display TV Guide
2
Select the current
programme or channel
select
access
3
Select [View]
(DVB)
Das Erste
19:30- 20:00
View
Timer Programming
select
watch
Note
To watch pay-TV
“Using Common Interface” (p. 53)
tx_l37_42_47e5b_Eng_2222.indb 19
1/30/2012 11:34:05 AM
