Accessories / Options
●
Quick Start
Guide
7
Attaching the stand
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
Do not disassemble or modify the stand.
●
Caution
Do not use with any other TVs or displays.
●
Do not use the stand if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic
●
dealer immediately.
During setup, make sure that all screws are securely tightened.
●
Ensure that the TV does not suffer any impact during installation of the stand.
●
Ensure that children do not climb onto the stand.
●
Install or remove the TV from the stand with at least two people.
●
Do not tilt the TV by
placing something
between the stand and the
floor. TV may fall over and
become damaged, and
personal injury may result.
Stand is very heavy.
Please handle with
both hands as shown
in image.
Assembly screw (4)
■
(silver)
XYN4+F12FJ
●
Stand
■
TBLX0186 (TX-L32D28BP, TX-L32D28BS, TX-L32D28BW)
●
TBLX0187 (TX-L37D28BS)
●
M4 × 12
Securing the TV
■
Use the assembly screws to fasten the
stand securely to the TV.
Make sure that the screws are
●
securely tightened.
Carry out the work on a horizontal and
●
level surface.
Depending on the length of the screw
●
driver you use, it is difficult to tighten
the two screws at the bottom. Make
sure all screws are securely tightened.
Foam mat or thick soft cloth
To prevent from falling, please
secure the TV to the wall by using
strong string or wire.
Put the strong string or wire through
●
the hole on the bottom rear of the TV
as shown in the illustration.
