F
AQs | On screen messages
74
Problem
Actions
Other
The remote control
does not work or is
intermittent
Are the batteries installed correctly?
(p. 6)
Has the TV been switched On?
The batteries may be running low. Replace them.
Point the remote control directly at the front of the TV (within about 7 m
and a 30 degree angle of the front of the TV).
Situate the TV so that sunshine or other sources of bright light do not
shine on the TV’s remote control signal receiver.
Parts of the TV
become hot
Temperature rises of parts of the front, top and rear panels will not pose
any problems in terms of performance or quality of the TV.
The LCD panel
moves slightly when
it is pushed with a
finger
Clattered sound
might be heard
There is some flexibility around the panel to prevent damage to the
panel.
The panel might move slightly when it is pushed with a finger, and
clattered sound might be heard. This is not a malfunction.
An error message
appears
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the
authorized Service Centre.
On screen messages
Message
Meaning / Action
All tuning data will be erased
[Shipping Condition] will erase all tuning data
(p. 47)
Are you sure ?
Confirm correct operation.
Are you sure you want to
delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may be
necessary to have an aerial installer check the signal and aerial alignment.
Reset channels.
(p. 36)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 43). You must enter
the PIN number before the channel will be displayed.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect the recorder
to the TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link or VIERA Link settings
(p. 58 - 61)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the
OK button to view the demonstration to explain how to use it.
Found new software version
.
Press OK to start update
(may take over 40 mins) or
press EXIT to ignore and
you can update when TV is
in standby
There is a new software available.
Invalid operation - Please
check settings and
connections.
Check the Q-Link or VIERA Link connection and setting
(p. 58 - 61)
Invalid system time. Please
exit !
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check
time display on Banner
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
Max. number of timers
already set !
The maximum number of timer programming events is 15.
