Advanced
23
•
DVB Settings (DVB)
System
Update
Update
TV’s
software
system
■
To update immediately
System Update
Auto Update Search in Standby
System Update Search Now
On
Select “Auto Update Search in Standby” and then set “On” or “Off”
•
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
set
select
Download new software to TV.
•
For details (p. 41)
If System Update is performed, the software will be updated (it may change TV
functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.
Select
“System Update Search Now”
Searches for an
update (for several
min.) and displays
a corresponding
message if any
Download
start
select
•
Download may take
for about 20 min.
Adjust the
standard time
Region
Select
Select the region where you live
to adjust the standard time.
•
The time contained in the
broadcast signal is UTC
(Universal Time coordinated)
formally known as GMT
(Greenwich Mean Time).
Adjust for
Summer Time
Daylight
Saving Time
Select time offset from the
standard time for Summer Time.
•
Normally select “Auto”.
•
If there is a gap between
displayed time and actual
time, set this function.
(Based on GMT)
Region
Standard time
Daylight Saving Time: Auto
(During Summer Time)
NSW / ACT
+10:00
+11:00
Victoria
Queensland
+10:00
South Australia
+9:30
+10:30
Western Australia
+8:00
+9:00
Northern Territory
+9:30
Tasmania
+10:00
+11:00
Note
•
During downloading, the TV will display a blank screen for 40 to 50 seconds. Do not
interrupt the TV during this procedure.
Note
•
When the TV is switched to standby, there will be a clicking sound after a short delay.
Similar clicking sounds will also occur at 3:00 AM and 5:00 AM (p. 41) when “Auto update
Search in Standby” is set to “On”. These sounds are normal.
