5
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
Caution
Notes
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to
fi
re or electrical shock.)
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your
fi
ngernail or other hard object.
•
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Blocked ventilation by curtains, etc. may
cause overheating,
fi
re or electrical shock.
Do not block the rear air vents
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Adjust the LCD panel to your desired angle
Ensure that the pedestal does not hang over the
edge of the base even if the TV swivels to the full
rotation range.
Do not place any objects or hands within the full
rotation range.
15°
15°
b
a
(View from the top)
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
Auto power standby function
Transport only in upright position
Irreversible damage can be caused.
Do not expose your ears to excessive
volume from the headphones
When using the pedestal, keep the space between
the bottom of the TV and the
fl
oor surface.
In case of using Wall-hanging bracket, follow the manual of it.
a: 464 mm / b: 381 mm
Set the mark at the centre as illustrated,
to have the swivel positioned at the
centre of the rotation angle.
Allow suf
fi
cient space around the
TV for radiated heat
10
10
10
10
(cm)
Minimum distance
