30
FREQUENTLY ASKED QUESTIONS
Problem
Actions
S
C
R
E
E
N
Chaotic image, noisy
Set ”P-NR” in the Picture menu (to remove
noise). (p. 13)
Check nearby electrical products
(car, motorcycle,fluorescent lamp).
No image is displayed
Is ”Colour” or ”Contrast” in the Picture menu
set to the minimum?
Blurry or distorted image
(no sound or low volume)
Retune channels (see pages 16-20)
S
O
U
N
D
No sound is produced
Is ”Sound Mute” active? (See page 6)
Is the volume set to the minimum?
Sound level is low or sound is
distorted
If digital sound connection has a problem,
select analogue sound connection. (p. 14)
Sound signal reception may be deteriorated.
Set ”NICAM” (p. 14) in the Sound menu to
”Off”.
O
T
H
E
R
TV unit goes into ”Standby
mode”
The sleep function is activated.
The TV unit enters ”Standby mode” about 30
min. after broadcasting ends.
The remote control does not
work
Are the batteries installed correctly? (p. 4)
Has the TV unit been switched On?
ON SCREEN MESSAGES
On Screen Messages
Actions / Meanings
All tuning data will be erased
”Shipping condition” will erase all tuning data.
Are you sure?
Confirm that this is the correct operation
Incorrect PIN Number
The PIN number you entered is wrong.
No stations found
Please insert the aerial siginal can be found in Auto setup.
Please wait.
A function is in progress.
WARNING
All current tuning data will be erased
Auto setup will erase all present analogue tuning data
(p. 19).
FOR YOUR GUIDANCE
Service:
Before requesting service for this LCD TV, please refer to the troubleshooting guide on previous page to eter-
mine the symptoms. To obtain service please contact your local Panasonic dealer quoting the model number and serial
number (both are located at the rear of the LCD TV).
