Auto T
uning
Quick Start
Guide
13
Search for access point
Connect the Wireless LAN Adaptor to the USB 1 or 2 port
Access points found automatically are listed.
Select your desired access point.
Access the encryption key
input mode
select “Yes”
access
select
access
WPS (Push button)
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor
and the access point.
Ensure that your access point supports WPS for this method.
●
WPS: Wi-Fi Protected Setup
●
TM
Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions.
To setup the wireless LAN connection, the wireless LAN Adaptor is required. Confirm the
●
encryption key, settings and positions of your access point before starting setup. For details, read
the manual of the access point.
Please note that this TV does not support wireless public access points.
●
Enter the encryption key of the access point.
Set characters one by one
To re-enter the encryption key, select “No”.
●
You can set characters by using numeric buttons (p. 30).
●
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
set
select
Select “Yes”
set
select
Store
RETURN
You can setup the
wireless LAN connection later
“Network Setup” (p. 53)
To skip this step
●
EXIT
or select “No”
If the connection is failed, check the encryption key, settings or positions of your access point.
●
For details, read the manual of the access point.
If connection to the access point is successful, we recommend you perform the “Connection Test”
●
to confirm connection to the internet has been made. The “Connection Test” can be found in the
Network Setup menu (p. 55).
Wireless LAN connection setup is completed
Start wireless LAN connection setup?
Please connect the wireless LAN adaptor to a USB terminal.
Yes
No
Available Access Points
Access Point A
11n (2.4GHz)
11n (5GHz)
SSID
No.
Wireless type
Encrypt
Reception
Access Point B
Access Point C
11n (5GHz)
1
2
3
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H I
J K L M N
U V W X Y Z
0 1 2 3 4 5 6
a b c d e
f
g h
i
j
k
l m n
u v w x y z
(
) + -
.
* _
O P Q R S T
7 8 9
!
:
#
o p q r
s
t
If the selected access point is not encrypted, the confirmation screen
●
will be displayed. It is recommended to select the encrypted access
point.
To search access points again
●
Y
For the information of the
●
highlighted access point
RECALL
Wireless LAN Adaptor
Access point
Internet
environment
Select the connection type
Connection Type
Please select network connection type.
WPS (Push button)
Search for access point
select
confirm
If your access point supports WPS
●
(Push button), then select this option.
If not, select “Search for access point”.
WPS(Push button)
1) Please press the ‘WPS’ button on the access
point until its light flashes.
2) When the light is flashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
