Frequently Asked
Questions
69
Problem
Actions
HDMI
Sound is unusual
•
Set the sound setting of the connected equipment to “2ch L.PCM”.
•
Check the [HDMI1 / 2 / 3 Input] setting in the Sound Menu.
(p. 25)
•
If digital sound connection has a problem, select analogue sound
connection.
(p. 61)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
•
Check the HDMI cable is connected properly.
(p. 51, 56 - 58)
•
Turn the TV and equipment Off, then turn them On again.
•
Check an input signal from the equipment.
(p. 62)
•
Use equipment compliant with EIA/CEA-861/861D.
Network
Cannot connect to the
network
•
Check the LAN cable or Wireless LAN Adaptor is connected properly.
(p. 43)
•
Check the connections and settings.
(p. 43 - 46)
•
Check the network equipment and network environment.
•
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the
file during DLNA
operations
•
Is the media server prepared?
(p. 42)
•
Check applicable data format.
(p. 63 - 64)
Cannot access the
Internet contents
•
Check the connections and settings.
(p. 43 - 46)
•
The server or connected line might be busy now.
Other
The TV goes into
Standby mode
•
Auto power standby function is activated.
•
The TV enters Standby mode about 30 minutes after analogue
broadcasting ends.
The remote control
does not work or is
intermittent
•
Are the batteries installed correctly?
(p. 6)
•
Has the TV been switched On?
•
Point the remote control directly at the front of the TV (within about
7 m and a 30 degree angle of the front of the TV).
•
Situate the TV away from sunshine or other sources of bright light not
to shine on the TV’s remote control signal receiver.
Parts of the TV become
hot
•
Even when the temperature of parts of the front, top and rear panels
has risen, these temperature rises will not pose any problems in
terms of performance or quality.
