6
C
●
●
●
●
●
●
A
5
●
●
●
●
●
●
Assembling / Removing the pedestal
Assembly screw (4)
M5 × 16
Bracket
Cover
Assembly screw (4)
M4 × 10
Base
Cable clamp (4) (p. 10)
■
Assembling the pedestal
2
A
C
D
B
E
1
3
■
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
enough and made of hard material.
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1
Remove the assembly screws from the cover.
2
Pull out the cover.
3
Lift the TV from the pedestal.
4
Remove the assembly screws from the bracket.
TH-L55DT60Q_EN.indd 6
TH-L55DT60Q_EN.indd 6
7/9/2013 2:56:28 PM
7/9/2013 2:56:28 PM
